2015 Alpine Five AM

From the 2015 Archive

You can find the current Alpine Five AM here.

RRP from: GBP £2,700.00

2015 Alpine Five AM
2015 Alpine Five AM
2015 Alpine Five AM
2015 Alpine Five AM
2015 Alpine Five AM
2015 Alpine Five AM
Previous Next

Alpine Five AM

Alpine Five AM £2,700.00
Total price: £2,700.00

Sizes and Colours

Sizes
S,  L, 
Colour
Decals

Frame & Fork

6061-T6 Monocoque/Reynolds Custom Butted Aluminium Tube. Wheel Size: 29 Rear wheel travel: 140

Fork
Fox Float 34 29 140 CTD Performance FIT 15QR T/S

Fox Float 34 29 150 CTD Factory FIT 15QR T/S Kashima

Fox Float 34 29 150 CTD Factory FIT 15QR T/S Kashima

The Fox 34 150 FIT with Trail Adjust is the answer for aggressive trail riders that maximises stiffness while minimising weight; a stiff robust chassis built to take the all-mountain hits with 150mm travel. Air spring pressure and rebound adjustment covers the setup fundamentals, with the tapered steerer and 15QR axle system keeping steering firm and precise.

Rockshox Pike 29 150 RCT3 Solo Air

Rockshox Pike 29 150 RCT3 Solo Air

One of the most sort after products of recent years the RockShox Pike has gone to the top of the wishlist for those looking for a fork that blends rigidity, low weight and damping quality with stealthy looks. They aren't on the front of some of the world's best Enduro racers bikes for nothing.

With 150mm of travel, tapered steerer, a 15mm Maxle axle and a three position compression switch all keeping you totally in charge of your ride the Pike is easily one of the best forks out there. Perfect for the best bike out there. Yours.

Adjusters:

  • Air spring pressure
  • External rebound
  • Low speed compression
  • 3 position compression (Open/Pedal/Lock)
Rear Shock
Fox Float Evolution Series CTD

Fox Float Factory Series Kashima CTD

Fox Float Factory Series Kashima CTD

This is the top of the line shock from Fox. Featuring Fox’s Climb Trail Descend system that ensures your fork and shock work together for unprecedented performance in all types of terrain.

Headset
Cane Creek 49mm For Tapered Steerer

Hope 4F 49mm Headtube Tapered Steerer

Hope 4F 49mm Headtube Tapered Steerer

The Hope 4F headset uses an integral (or Zero Stack) top cup that fits within the height of the headtube, and an external bottom cup to facilitate the tapered steerer fork. The bearings are stainless steel; sealed, reliable and replaceable. The cups, taper ring and crown race (split for easy installation) are all machined in Barnoldswick to finish the best headset on the market. Fit and forget perfection. Dimensions: ZS49/28.6 EC49/40

Rear Axle
Maxle 135x12mm, 142mm Hub Spacing

Wheels & Tyres

Hope Pro II Evo Hubs

Hope Pro II Evo + Mavic XM319 29

Hope Pro II EVO hubs are machined from a solid billet of 2014 T6 aluminium in Barnoldswick, England. The new design features a thicker axle configuration to increase stiffness and durability with any dropout system. Spinning on cartridge bearings and protected by a frictionless labyrinth seal, the hub is driven by a twenty-four tooth steel ratchet with four pawls engaging the system. Quality doesn't get much better, the Pro II EVO hub will last longer and roll further than any other. Now featuring the latest 40T freehub body.

Hope Pro II Evo Hubs + Maxxis Tyres

Maxxis Minion 3C Exo TR/ High Roller II Exo TR 2.3

Maxxis Minion 3C Exo TR/ High Roller II Exo TR 2.3

The choice of hardcore trail riders the world over. The combination of the Maxxis Minion 3C on the front and High Roller II Exo on the rear gives you all the traction and steering precision you need, while the Tubeless Ready carcass offers stability at low pressures and fewer punctures.

Hope Pro II Evo + Mavic XM319 29

Hope Pro II Evo + Mavic XM319 29

Hope Pro II EVO hubs are machined from a solid billet of 2014 T6 aluminium in Barnoldswick, England. The new design features a thicker axle configuration to increase stiffness and durability with any dropout system. Spinning on cartridge bearings and protected by a frictionless labyrinth seal, the hub is driven by a twenty-four tooth steel ratchet with four pawls engaging the system. Quality doesn't get much better, the Pro II EVO hub will last longer and roll further than any other. Now featuring the latest 40T freehub body.

Maxxis Tyres

Maxxis Minion 3C Exo TR/ High Roller II Exo TR 2.3

The choice of hardcore trail riders the world over. The combination of the Maxxis Minion 3C on the front and High Roller II Exo on the rear gives you all the traction and steering precision you need, while the Tubeless Ready carcass offers stability at low pressures and fewer punctures.

Wheelset
Formula + Mavic XM319 29
Tyres
Continental Trail King 2.2 29"

Drivetrain

1x10 (inc. Hope 40T-Rex/Shimano XT/ MRP AMG)

Shimano XT 10spd

Shimano XT 10spd

High performance, low weight; the Shimano XT cassette is designed to give seamless shifts even under the pressures of racing.

Hope 40T-Rex

Hope 40T-Rex

The Hope 40t-Rex (40t ratio expander) gives your 11-36 10spd cassette a bit of a boost, expanding it to an 11-40 range, making a 1 x 10 drivetrain more manageable for all-round off road riding.

MRP AMG

MRP AMG

Combining class leading chain retention with trail-worthy bump deflection the MRP AMG is the choice of those who like to play in the rough stuff.

Race Face Respond Single 30T Narrow Wide Ring

Race Face Respond Single 30T Narrow Wide Ring

RaceFace's narrow wide chainring offers ultimate chain retention whatever the conditions.

Crankset
Race Face Respond Double 24-32T Bash
Chain Device
Shimano Deore
Rear Mech
Shimano SLX Shadow +
Cassette
Shimano 10spd 11-36T
Shifters
Shimano SLX
Bottom Bracket
Raceface

Hope Ceramic

Hope Ceramic

Hope Ceramic Bottom Bracket : Machined aluminium cups with ceramic bearings in stainless races. Custom, Swiss made bearings are double sealed, fully serviceable and removable. Using a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings this bottom bracket has a much greater life span than stock units. Weighing in at 109g

Hope Stainless Steel

Hope Stainless Steel

Hope Stainless Bottom Bracket: The machined aluminium cups with full stainless steel cartridge bearings. Custom, Swiss made bearings are double sealed, fully serviceable and removable. Using a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings this bottom bracket has a greater life span than stock units. Weighing in at 113g

Chain

Braking

Brakes
Shimano Deore

Shimano XT

Shimano XT

Shimano XT has always been the benchmark for perfomance. Featuring Servo-Wave technology and Ice-Tech brake pads to deliver smooth, controllable power regardless of the conditions.

Finishing Kit

Aluminium Freeride Pack 35mm

Renthal Fatbar 20mm Rise 780mm

Renthal Fatbar 20mm Rise 780mm

Responsible for the best motocross bars in the World, Renthal know a thing or two about craftsmanship. The 780mm Fatbar is manufactured in the UK from high strength 7 series aluminium alloy. Shot peened and anodised for a corrosion resistant finish, the 20mm rise and 7 degree back sweep handlebar is light, strong, durable and perfectly proportioned

Orange SDG Falcon 2015 Ti-Alloy

Orange SDG Falcon 2015 Ti-Alloy

The SDG Falcon saddle utilizes the "Peri-Canal" which enables fore and aft movement without pressure in the perineum region. A flat and squared off nose to extend ease of movement to the front of the saddle with a lightweight foam w/ relief zone cut-out for additional comfort. Seamless three panel cover and custom Orange graphics. Ti-Alloy rails.

Hope Freeride 31.8 x 35mm Extension

Hope Freeride 31.8 x 35mm Extension

Light, stiff and made in the UK; the Hope Freeride stem adds a touch of class to the front of your bike. This stem has a 31.8mm bar clamp and a 35mm Extension

Aluminium Freeride Pack 50mm

Renthal Fatbar 20mm Rise 780mm

Renthal Fatbar 20mm Rise 780mm

Responsible for the best motocross bars in the World, Renthal know a thing or two about craftsmanship. The 780mm Fatbar is manufactured in the UK from high strength 7 series aluminium alloy. Shot peened and anodised for a corrosion resistant finish, the 20mm rise and 7 degree back sweep handlebar is light, strong, durable and perfectly proportioned

Orange SDG Falcon 2015 Ti-Alloy

Orange SDG Falcon 2015 Ti-Alloy

The SDG Falcon saddle utilizes the "Peri-Canal" which enables fore and aft movement without pressure in the perineum region. A flat and squared off nose to extend ease of movement to the front of the saddle with a lightweight foam w/ relief zone cut-out for additional comfort. Seamless three panel cover and custom Orange graphics. Ti-Alloy rails.

Renthal Apex 50mm

Renthal Apex 50mm

Renthal Apex Stem

The Renthal Apex combines All Mountain strength, Enduro stiffness and XC lightweight.

Unique 240deg handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars.

The Apex is fully CNC machined, featuring an oversize centre bore, extensive 3-D machining and external webbing to maximise structural strength and stiffness and minimise weight.

Stem
Kore Repute Zero Degree 50mm
Handlebar
KORE Torsion Flat 800mm Wide
Grips
Strange Lock-On
Seatpost
KORE Torsion

Rockshox Reverb

Rockshox Reverb

The RockShox Reverb gives you infinite seat-height adjustment in a hydraulically actuated remote package, allowing you to reliably adjust your saddle height on the fly.

Bolt type seat clamp replaces QR seat clamp with this option.

Saddle
Orange SDG Falcon 2015 Chromo
Seat Clamp
Strange Bolted

Hope Bolted

Hope Bolted

The Hope seat clamp is machined from billet aluminium to match the rest of your Hope components and uses a hard-wearing brass seat for the QR lever pivot. The seat clamp collar is now a universal design, so you can convert your bolted collar to QR or QR collar to a bolted design.

NB. The QR version does not come with bolt.

Hope QR

Hope QR

The Hope seat clamp is machined from billet aluminium to match the rest of your Hope components and uses a hard-wearing brass seat for the QR lever pivot. The seat clamp collar is now a universal design, so you can convert your bolted collar to QR or QR collar to a bolted design.

NB. The QR version does not come with bolt.

Pedals

Hope F20 Flat Pedal

Hope F20 Flat Pedal

Featuring a concave platform machined from 2014 T6 Aluminium alloy for strength and laced with 20 pins to keep your foot exactly where you want it, even in the rough stuff.

Mudguards

Performance Packs

Accessories

Sorry, no accessories available at this time